Ryobi OLP1832B - Maintenance and Troubleshooting; Removing a Blockage

11
Operation
2
1
1
2
REMOVING A BLOCKAGE
1. Press the latch on each side of the battery
pack. Remove the battery pack.
WARNING: Keep bare hands away from the
blades at all times.
2. Strike the cutting blade with the rubber
mallet to remove the jammed limb or
branch.
NOTE: The cutting blade opens to
release the jammed limb or branch.
WARNING: Strike the cutting blade on the
topmost part. Do not strike the cutting blade
on the middle part.
NOTE: Make sure to keep the product clean
and free of blockages.