Ryobi OLP1832B - Product Setup and Operation; Getting Started

7
Getting started
1
2
3
1 2 3
NOTE: The hook can be attached to
the other side of the product.
1
2
4 5
Install the battery pack in the product.
Make sure that the latch on each side
of the battery pack clicks into place
and that the battery pack is securely
attached before using the product.
Squeeze and hold the lock-out trigger
and on/off trigger.
Wear eye and head protection while
operating the product. When handling
the blade assembly, wear non-slip,
heavy-duty protective gloves. Wear
non-skid, protective footwear that will
protect your feet and improve your
footing on slippery surfaces.
Remove the blade cover. Install the hook. Insert the screws and
turn them clockwise to tighten.