ENGLISH
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
5
Original Instructions
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
■ Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
■ Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
■ Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
■ Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
BATTERY TOOL USE AND CARE
■ Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
■ Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
■ When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
■ Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
SERVICE
■ Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
LINE TRIMMER SAFETY WARNINGS
■
Never allow children, persons with reduced
physical, sensory, or mental capabilities or
lack of experience and knowledge, or people
who are unfamiliar with these instructions to
use the product.
■ Use the product in daylight or with good
artificial light.
■ Avoid using the product on wet grass.
■ Keep proper footing and balance at all times,
and be sure of proper footing on slopes.
■ Do not walk backwards when using the
product. Walk, never run.
■ Keep the head attachment below waist level.
■ Never use the product with damaged guards
or without guards in place.
■ Do not fit a metal replacement line.
■ Keep hands and feet away from the cutting
means at all times, especially when turning
on the motor.
■ Beware, the cutting means continue to
rotate after the motor is turned off.
■ Beware of objects thrown by the cutting
means. Clear debris like small stones, gravel,
and other foreign objects from the work area
before starting operation. Wires or string may
become entangled with the cutting means.
■ To reduce the risk of injury associated with
contacting moving parts, always turn off the
product, remove the battery pack, and allow
both to cool down. Make sure that all moving
parts have come to a complete stop:
● before servicing
● before clearing a blockage
● before checking, cleaning, and working
on the product
● before changing accessories
● after striking a foreign object
● whenever leaving the product unattended
● whenever performing maintenance
● whenever the product starts to vibrate
abnormally
To Next Page
Loading...
