Ryobi P421 - Page 16

ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
Phone 1-800-525-2579
www.ryobitools.com
OPERATOR’S MANUAL
4-1/2 in., 18 VOLT ANGLE GRINDER
P420
• SERVICE
Now that you have purchased your product, should a need ever exist for repair parts
or service, simply contact your nearest Authorized Service Center. Be sure to provide
all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest
Authorized Service Center. You can also check our web site at www.ryobitools.com for a
complete list of Authorized Service Centers.
• MODELNO.ANDSERIALNO.
The model number of this product will be found on a plate attached to the motor housing.
Please record the model number and serial number in the space provided below.
• HOWTOORDERREPAIRPARTS
When ordering repair parts, always give the following information:
 • MODELNUMBER
 • SERIALNUMBER
P420
Ryobi® is a registered trademark of Ryobi Limited used under license.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
•leadfromlead-basedpaints,
•crystallinesilicafrombricksandcementandothermasonryproducts,and
•arsenicandchromiumfromchemically-treatedlumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out microscopic particles.
983000-984 (WW)
6-24-11 (REV:06)