Ryobi P591 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT SHEARS
CISAILLES DE 18 V
CIZALLAS RECORTADORAS DE 18 V
P591
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para
reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar
este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Power Tool
Safety Warnings .............................. 2-3
 Shears Safety Warnings ......................3
Symbols ...............................................4
 Assembly .............................................4
 Operation ......................................... 5-7
 Maintenance ........................................7
 Illustrations ..........................................8
 Parts Ordering
and Service ......................... Back page
TABLE DES MATIÈRES
****************
 Avertissements de sécurité générales
relatives aux outils électriques ........ 2-3
 Avertissements de sécurité relatifs
cisailles ................................................3
Symboles ............................................. 4
 Assemblage ......................................... 4
 Utilisation ........................................ 5-7
 Entretien ..............................................7
 Illustrations ..........................................8
 Commande de pièces
et dépannage .................... Page arrière
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad para
herramientas eléctrica .................... 2-3
 Advertencias de seguridad de
cizallas recortadoras ........................... 3
Símbolos ............................................. 4
 Armado ...............................................4
 Funcionamiento .............................. 5-7
 Mantenimiento .................................... 7
 Illustraciones ....................................... 8
 Pedidos de piezas
y servicio ........................ Pág. posterior

Ryobi P591 Specifications

General

Voltage	18V
LED Light	Yes
Battery Type	Lithium-Ion
Type	Circular Saw
Battery Compatibility	18V ONE+
Bevel Capacity	50°

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, well lit, and free from hazards like flammable substances.

Electrical Safety

Use proper plugs, avoid water, and protect cords from damage.

Personal Safety

Stay alert, use PPE, prevent accidental starts, and maintain balance.

Power Tool Use and Care

Use correct tools, maintain them, store safely, and follow instructions.

Battery Tool Use and Care

Recharge correctly, use designated packs, handle carefully, avoid heat/fire.

Shears Safety Warnings

Safe Operation Practices

Handle tool safely, wear eye protection, use dust mask, and hearing protection.

Battery Precautions for Shears

Avoid placing batteries near heat, prevent crushing, and avoid charging in wet locations.

Symbols

Signal Words and Meanings

Explains risk levels associated with DANGER, WARNING, CAUTION, and NOTICE.

Product Symbols and Explanations

Defines symbols like Safety Alert, Read Operator's Manual, Eye Protection, and Recycle.

Operation

Assembly

Instructions for assembling the product and attachments, including safety warnings.

Installing/Removing Battery Pack

Procedure for inserting and removing the battery pack, with safety notes.

Installing/Removing Belt Clip

Steps for attaching and detaching the belt clip to the tool housing.

Lock-Off Button

Details the function of the lock-off button to prevent accidental starting.

Variable Speed Switch Trigger

Explanation of how the variable speed trigger controls tool speed and operation.

Rotating Collar

Instructions for rotating the collar to adjust cutting angles.

Making a Cut

Guidance on how to make cuts, including material limits and safety precautions.

Adjusting the Cutting Blades

Procedure for adjusting the blade gap for different materials.

Replacing the Cutting Blades

Step-by-step instructions for replacing worn or dull cutting blades.

Maintenance

General Maintenance

Guidelines for cleaning the tool, advising against solvents for plastic parts.