Ryobi RACPWS3 - Operation: Detergent Solution Application; Detergent Tank Preparation; Applying Detergent with Vario Lance

16
Operation
USING DETERGENT SOLUTION
WARNING: Do not point the lance towards
people, animals, live electrical equipment, or
the product.
1. Turn the on/off switch to the off position.
Remove the cap from the detergent tank.
2. Fill the tank with detergent solution.
3. Close the tank with the cap.
4. Insert the vario lance into the trigger
handle. Turn the lance clockwise until it
clicks into place.
5. Turn the rear end of the nozzle
counterclockwise to decrease the water
pressure.
1
2
1
2
3
1
2
4
5