SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOLS NAME EXPLANATION
Safety Alert
Indicates danger, warning or caution. It means attention!!! Your safety
is involved.
Read Your Operator's
Manual
Your manual contains special messages to bring attention to potential
safety concerns as well as operating and servicing information. Please
read all the information carefully to ensure satisfaction and safe use.
Wear eye, hearing and
head protection
Wear eye, hearing and head protection when operating this equipment.
Danger of Ricochet. Keep all bystanders, especially children and pets,
at least 15 m from the operating area.
Tri-Arc blade
Tri-Arc blade is appropriate for this unit and is suited for cutting pulpy
weeds and vines.
Do not use toothed blade This unit is not intended for use with a toothed saw blade.
RPM Decal
Rotational direction and maximum speed of the shaft for the cutting
attachment..
Boots Wear non-slip safety footwear when using this equipment.
Gloves Wear non-slip, heavy-duty gloves.
No Smoking Do not smoke when mixing fuel or filling the fuel tank.
Petrol
Use unleaded petrol intended for motor vehicle use with an octane
rating of 91 ([R+M]/2) or higher.
Oil Use 2-stroke oil for air cooled engines.
Mix Petrol and Oil Mix the fuel mix thoroughly and also each time before refuelling.
Blade thrust Beware of blade thrust.
To Next Page
Loading...
