EasyManua.ls Logo

Ryobi RBL30MVA - Starting and Stopping

Ryobi RBL30MVA
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
STARTING AND STOPPING
WARNING
Never start or run the engine inside a closed or poorly
ventilated area; breathing exhaust fumes can kill.
TO START A COLD ENGINE (FIG. 5):
n Move ignition switch (3) to “ I ” run position.
n Make sure cruise control (4) is locked in idle position.
Do not engage the throttle trigger (2) or cruise control
during the start-up process.
n Slowly press the primer bulb 7 times.
n Rotate the choke dial clockwise to the FULL CHOKE
position.
n Pull the starter grip sharply until engine attempts to run
(no more than 4 pulls).
n Rotate the choke dial to the counterclockwise HALF
CHOKE position.
n Pull the starter grip sharply until the engine runs.
n Allow the engine to run for 10 seconds.
n Rotate the choke dial counterclockwise to the RUN
position.
OPERATION
x7
Fig. 5

Other manuals for Ryobi RBL30MVA

Related product manuals