7
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
Read The Operator’s Manual
Safety Alert
Keep Bystanders Away
Cutting Hazard
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye and Hearing Protection
Always wear safety goggles, safety glasses with side shields,
or a full face shield, as well as hearing protection when
operating this product.
Precautions that involve your safety.
Keep all bystanders at least 15m. away.
Keep feet and hands away from rotating tines.
Petrol and Oil
Use unleaded petrol intended for motor vehicle use with an octane
rating of 87 [(R + M)/2] or higher. This product is powered by a 2-
stroke engine and requires pre-mixing petrol and 2-stroke oil.
Servicing requires extreme care and knowledge and should
be performed only by a qualied service technician. For
service we suggest you return the product to your nearest
for repair. When servicing,
use only identical replacement parts.
The following signal words and meanings are intended to explain the levels of risk associated with this product.
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in prop-
erty damage.
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completely the operator’s manual. Save this operator’s
manual and review frequently for continuing safe operation
and instructing others who may use this product.
To Next Page
Loading...
