Ryobi RFT254N - Description; Specifications; Features; Know Your Wheeled Trimmer

3
ENGLISH
Fully press and release the primer bulb
10 times.
Risk of getting a cut.
Do not install or use any type of blade on
a product displaying this symbol.
10,000
Rotational direction and maximum speed
of the shaft for the cutting attachment.
109
83
Guaranteed sound pressure and sound
power level.
C-Tick compliance mark. Product meets
applicable regulatory requirements.
DESCRIPTION
(REFER TO FIGURE SHEET)
1. Pro Cut string head
2. String head/shaft assembly
3. Mufer
4. Starter grip and rope
5. Choke lever
6. On/Off switch
7. Throttle trigger
8. Handlebar
9. Line carrier
10. Primer bulb
11. Air lter cover
12. Fuel cap
13. Grass deector
14. Mow ball
15. Button
16. Guide recess
17. Knob
18. Lower handlebar
19. Upper handlebar
20. Frame opening
21. Bolt
22. Throttle cable
23. Holes
24. Clip
25. Bolt
26. Wing screw
27. Tab
28. Slot
29. Hole
30. String line
31. Line exit holes
32. Line load holes
33. Top cap
34. Open area
35. Full choke position
36. Run position
37. Hex bolt
38. Direction to tighten the mow ball
39. Direction to loosen the mow ball
40. Air intake area
41. Idle speed screw
42. Air lter element
43. Air lter base
44. Spark plug
45. Spark plug cover
SPECIFICATIONS
Weight
- Without fuel
9.7 kg
Fuel tank volume 620 ml or (0.62 L)
Line cutting length 254 mm
Engine displacement 25.4 cm
3
Line diameter 2.7 mm
Maximum engine performance
(in accordance with ISO 8893)
0.67 kW
Maximum rotational frequency
of the spindle
10,000 min
-1
Engine speed (rotational
frequency) at recommended
max. spindle rotational
frequency
12,000 min
-1
Engine speed (rotational
frequency) at idle
3,200-4,000 min
-1
Fuel consumption (in
accordance with ISO 8893) at
max. engine performance
0.54 kg/h
Specic fuel consumption (in
accordance with ISO 8893) at
max. engine performance
0.60 g/kW.h
FEATURES
KNOW YOUR WHEELED TRIMMER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.