PRODUCT SPECIFICATIONS
Model RIG2000PCB
AC Output
AC frequency (Hz) 50
AC output voltage (V) 240
Max. rated AC output (W) 1600
Max. rated current (A) 6.67
Main on/off switch (A) 16
Power Factor 1.0
DC Output
DC output voltage (V) 5
Max. rated current (A) 2.1
Engine
Engine type Single overhead valve
(SOHV)
Spark plug NGK BPR7HS,
TORCH E6RTC
Bore x Stroke (mm) 48 x 43
Displacement (cc) 80
Starting system Recoil
Fuel type Unleaded fuel
Lubrication oil SAE 10W-30
Engine oil volume (l) 0.35
Fuel tank capacity (l) 4.5
Max. output (W) 2000
Output speed (rpm) 3050~5000
Run time (Full load) 4 hrs
Run time (Half load) 7.4 hrs
Approvals
AS/NZS 3010 Yes
EPA Yes
EMC Yes
Uncertainty dB 3
Noise level (4 m) LpA dB (A) 68
Noise level (7 m) LpA dB (A) 63
Noise level LwA dB (A) 91
Storage time Before storing
Less than 2 months • Drain fuel from the tank and dispose of
in a suitable container according to state
and local ordinances.
2 months to 1 year • Drain fuel from the carburettor.
• Drain fuel from the tank and dispose of
in a suitable container according to state
and local ordinances.
1 year or more • Drain fuel from the carburettor.
• Remove the spark plug.
• Drain fuel from the tank and dispose of
in a suitable container according to state
and local ordinances.
• Put a tablespoon of engine lubricant into
the spark plug cylinder. Turn the engine
slowly with the pull rope to distribute the
lubricant.
• Reinstall the spark plug.
• Change the engine lubricant.
NOTE: If storing fuel in suitable container for later use,
make sure the fuel has been treated with fuel stabilizer
according to the stabilizer manufacturer's instructions.
To Next Page
Loading...
