3
English (Original Instructions)
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME EXPLANATION
Safety alert
Indicates danger, warning or caution. It means attention!!!
Your safety is involved.
Read your operator’s
manual
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satisfaction and safe use.
Wear eye, hearing and
head protection
Wear eye, hearing and head protection when operating the
equipment.
Keep bystanders away
Keep all bystanders, especially children and pets, at least 15m
from the operating area.
Ricochet Danger of ricochet.
Boots Wear non-slip safety footwear when using the product.
Gloves Wear non-slip, heavy-duty gloves.
No smoking Do not smoke when mixing fuel or filling the fuel tank.
Petrol
Use regular unleaded petrol intended for motor vehicle use with an
octane rating of 91 ([R+M]/2) or higher. E10 is not recommended.
Oil Use 2-stroke oil for air cooled engines.
Mix petrol and oil Mix the fuel mix thoroughly and also each time before refuelling.
No blade Do not install any type of blade on this unit.
Do not use toothed blade This unit is not intended for use with a toothed saw type blade.
SYMBOLS
To Next Page
Loading...
