EasyManua.ls Logo

Ryobi RLT30CESC - Page 17

Ryobi RLT30CESC
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
English(Original instructions)
Keep hands away from blades.
Run position
Set the choke lever to “FULL” choke position.
Set the choke lever to "HALF" choke position.
Set the ignition switch to the "I" (ON) position.
Press the primer bulb 10 times.
Pull the starter rope to start.
Squeeze the throttle lock and throttle trigger to run.
Wait 10 seconds.
To stop the engine, move the ignition switch to the “O”
stop position .
Conforms to all regulatory standards in the country in the
EU where the product is purchased..
EurAsian Conformity Mark
Guaranteed sound power level is 112 dB.
The following signal words and meanings are intended to explain the levels of risk associated with the product.
SYMBOLS SIGNAL MEANING
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
Ukrainian mark of conformity

Related product manuals