13
English(Original instructions)
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
Name Explanaton
Safety Alert Symbol
Indicates danger, warning or caution. It means attention!!!
Your safety is involved.
Read Your Operator's Manual
Your manual contains special messages to bring attention
to potential safety concerns as well as operating and
servicing information. Please read all the information
carefully to ensure satisfaction and safe use.
Wear eye, hearing and head
protection
Wear eye, hearing and head protection when operating
this equipment.
Ricochet, Keep Bystanders Away
Beware of thrown or flying objects. Keep all bystanders,
especially children and pets, at least 15m away from the
operating area
The product is not intended for use with a toothed saw
type blade.
No blade Do not use metal blade (s) on the product
RPM Decal
Rotational direction and maximum speed of the shaft for
the cutting attachment.
Boots Wear non-slip safety footwear when using this equipment.
Gloves Wear non-slip, heavy-duty gloves.
No Smoking Do not smoke when mixing fuel or filling fuel tank.
Petrol
Use unleaded gasoline intended for motor vehicle use
with an octane rating of 91 ([R+M]/2) or higher.
Lubricant Use full synthetic 2-stroke lubricant for air cooled engines.
Mix Petrol and Lubricant
Mix the fuel mix thoroughly and also each time before
refuelling.
Switch
On/Off Switch
I = ON to Run
O = OFF to Stop
To Next Page
Loading...
