31 — English
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Blades do not rotate. Battery charge is low.
Blade engage knob is down.
Operator is not fully seated.
Build-up of debris under mower.
Charge the battery.
Raise blade engage knob.
Sit down fully on the seat.
Clean underside of mower housing.
Blades do not rotate while moving in
reverse.
Reverse mode option is off.
Blade engage knob is down.
Press reverse mode button to activate.
Raise blade engage knob.
Mower won’t reach full speed. Battery charge is low. Charge the battery.
Blades continue to turn after operator
leaves seat without parking brake set.
Safety interlock system is not func-
tioning correctly.
Ensure safety interlock system seat plug
is fully connected. If blades still won’t
stop, take mower to authorized service
center for repair.
Headlights not working. Headlights are off.
Headlights are damaged.
Press headlight button to turn head-
lights on.
Replace headlights.
Battery will not charge. Bad battery cells.
Poor cable connections.
Replace battery.
Check/clean all battery connections.
MAKE THE MOST OF YOUR PURCHASE!
Go to http://register.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the RYOBI Help Line!
To Next Page
Loading...
Need help?
General
