Ryobi RP4206 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
Tek4® INSPECTION SCOPE
MICROSCOPE D’INSPECTION Tek4®
LENTE DE INSPECCIÓN CON
TELESCOPIO DE Tek4®
RP4206
180
INCLUDES: Inspection Scope, Charger,
Battery Pack, Operator’s Manual
TABLE OF CONTENTS
****************
 Important Safety Instructions ............. 2
Symbols ..............................................3
Features ..............................................4
 Assembly ............................................ 4
 Operation .........................................4-5
 Maintenance ....................................... 6
 Figures (Illustrations) ..........................7
 Parts Ordering and Service
............................................Back page
INCLUT : Microscope d’inspection,
chargeur, bloc-pile, manual del operator
TABLE DES MATIÈRES
****************
 Instructions importantes concernant la
sécurité ..............................................2
Symbols ..............................................3
Caractéristiques .................................4
 Assemblage ........................................4
 Utilisation ........................................4-5
 Entretien .............................................6
 Figures (illustrations) ...........................7
 Commande de pièces et dépannage
..........................................Page arrière
INCLUYE: Lente de inspección con
telescopio, cargador, paquete de baterías,
manual del operador
ÍNDICE DE CONTENIDO
****************
 Instrucciones de seguridad
importantes ........................................2
Símbolos ............................................3
Características ...................................4
 Armado ..............................................4
 Funcionamiento ............................. 4-5
 Mantenimiento ...................................6
 Figuras (illustraciones) .......................7
 Pedidos de piezas y servicio
......................................Pág. posterior
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Ryobi RP4206 Specifications

General

Corded/Cordless	Corded
Voltage	120 V
Planning Width	3-1/4 inches
Max Cut Depth	1/8 inch
Power Source	Corded
Amperage	6.5 A
No Load Speed	16, 500 RPM

Summary

Important Safety Instructions

Symbols

Features

Know Your Inspection Scope

Understand the tool and manual for safe operation before use.

Auto Power Off

The inspection scope automatically shuts off after five minutes of inactivity.

Battery Meter

Indicates when the 4V battery pack is running low on charge.

Camera Cable

Displays the image from the camera on the LCD screen.

High-Output LEDs

Four LEDs provide light in dark or tight areas.

Rotate Button

Press to flip the LCD image 180 degrees.

Operation

Waterproof Feature

Only camera/cable are waterproof; other parts water-resistant. Do not submerge.

Install/Remove Battery Pack

Instructions for installing and removing the battery pack.

Power Button

How to turn the inspection scope on and off using the power button.

Rotate Button

Press to rotate the LCD image 180 degrees.

LED Brightness/Dimmer Button

Adjusts LED brightness levels or turns them off.

Maintenance

General Maintenance

Use clean cloths for cleaning; avoid solvents on plastic parts.

Storage

Store in a cool, dry location and remove battery pack before storing.

Battery Pack Removal and Preparation for Recycling

Instructions for removing battery pack for recycling, including terminal protection.