STARTING INSTRUCTIONS
1
3
Figure 9
2
3
4
5
6 7 8
9
10 11
Push primer bulb x 10. Move choke lever to “START”
postion.
Lock throttle by steps “1, 2, 3”.
Pull untill engine attempts to start
(Max 6 pulls).
Move choke lever to “RUN”
position.
Pull to start (Max 2 pulls) then full
throttle run for 5-20 seconds.
Hold “STOP” for 2 seconds to stop. Attach the auger bit and lock with
pins
Hold “STOP” for 2 seconds to stop.Run for normal operation.Pull to run (Max 4 pulls).
1
2
3
FUEL MIX RATIO
To Next Page
Loading...
