What to do if my Ryobi Paper Shredder has a power failure?
If your Ryobi Paper Shredder experiences a power failure, ensure that the power supply cable, plug, and house fuse are securely connected and switched on. This will resolve interruptions in the power supply.
Why is the material not being drawn into my Ryobi RSH2400RG?
If the material isn't being drawn into your Ryobi Paper Shredder, it could be due to a few reasons. First, the material might be jamming the feed funnel; if this happens, stop the motor by pressing the switch marked “O”, then pull the material from the feed funnel. When re-feeding, ensure thick branches don't immediately engage the pre-cut notches. Another cause might be a blocked cutting blade. If the cutting blade is damaged on one side, reverse the blades. If the cutting blade is damaged on both sides, purchase replacement blades from your local Ryobi stockist.
General| Brand | Ryobi |
|---|---|
| Model | RSH2400RG |
| Category | Paper Shredder |
| Language | English |
To Next Page
