Why Ryobi RSH2845T Paper Shredder motor does not run?
The Ryobi Paper Shredder motor might not run because the overload protection has been activated. To resolve this, allow the motor to cool down, then press the reset button and switch the product on again. Alternatively, there could be a power failure. In this case, check the power supply cable, the plug, and the house fuse.
What to do if Ryobi Paper Shredder material is not drawn in?
If the material isn't being drawn into your Ryobi Paper Shredder, it could be jammed in the feeding funnel. Please refer to the manual for instructions on clearing obstructions. Another possibility is that the shaving plate is too far from the cutting means; in this case, consult the manual for shaving plate adjustment instructions.
Basic safety precautions and warnings applicable to the product's operation.
Information on user familiarization and safe operation of the product.
Steps and checks to perform before operating the product.
Safety precautions related to the electrical connection and supply.
Specific safety rules and precautions for operating the shredder.
Detailed instructions and warnings during the shredding process.
Guidelines for safely moving and storing the shredder.
Instructions for adjusting the shaving plate to ensure optimal performance.
Identification of potential hazards and risks that remain even with proper use.
Overview of product components and their identification numbers.
Recommendations for shredding different types of material effectively.
Explanation of safety symbols and warnings found on the product itself.
Glossary of symbols used throughout the manual for user guidance.
General| Power | 2800 W |
|---|---|
| Product color | Black, Green, Grey |
| Cutting system | Blade |
| Material throughput | - kg/h |
| Collection box capacity | 55 L |
To Next Page
