Need help?Do you have a question about the Ryobi RTS721S and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Motor Power | 15 Amp |
| Weight | 50 lbs |
| No Load Speed | 5000 RPM |
| Max Cutting Depth at 90 Degrees | 3-1/2 inches |
| Max Cutting Depth at 45 Degrees | 2-1/2 inches |
| Arbor Size | 5/8 inch |
| Max Ripping Capacity Left | 12 inches |
| Blade Diameter | 10 inches |
| Table Size | 25 in. x 17 in. |
Lists and identifies all parts of the Ryobi tile saw.
Discusses the tool's speed and appropriate wiring.
Details the grounding requirements and procedures for the tool.
Step-by-step instructions for attaching the blade guard bracket and guard.
How to attach and adjust the rip guide for cutting.
Details on how to connect stand legs and support brackets.
Procedure to test the Residual Current Device for safety.
Instructions for adjusting and using the rip and mitre guides.
Step-by-step process for replacing the cutting blade.
To Next Page
