Ryobi RY3714 - Maintenance Schedule; Bar and Chain Combinations

Page 37 — English
MAINTENANCE SCHEDULE
Inspect for Clean Replace Replace
Maintenance Damage Before Every Every 25 Hours Every
Part Each Use 5 Hours or Yearly 50 Hours
* CATALYTIC MUFFLER ASSEMBLY ....................................................................................X
SPARK SCREEN ..................................................................................................................X
* AIR FILTER ASSY
includes:
Filter..................................................................... X
* CARBURETOR ASSY
includes:
Gaskets ...............................X
* FUEL TANK ASSY
includes:
Fuel Lines ............................X
Fuel Cap ..............................X
Fuel Filter ............................................................................................. X
* IGNITION ASSY
includes:
Spark Plug ........................................................................................... X
* NOTICE: THE USE OF EMISSION CONTROL COMPONENTS OTHER THAN THOSE DESIGNED
FOR THIS UNIT IS A VIOLATION OF FEDERAL LAW.
Chain specifications: 3/8 in. pitch, .050 in. chain gauge, low-profile skip tooth
Length of Bar Guide Bar Part Number Chain Part Number Drive Links
14 in. 311482001 Power Care Y52 52
16 in. 311482002 Power Care Y56 56
BAR AND CHAIN COMBINATIONS
MAINTENANCE