Ryobi RY40507 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
10 in. 40 VOLT BRUSHLESS CHAIN SAW
SCIE À CHAÎNE SANS BALAI
DE 40 V DE 25,4 cm (10 po)
MOTOSIERRA SIN ESCOBILLAS
DE 25,4 cm (10 pulg.), 40 V
RY40507
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
TABLE OF CONTENTS
 General Power Tool Safety Rules .... 2-4

Chain Saw Safety Warnings ............ 4-8

Symbols ........................................ 9-10

Glossary of Terms .............................11

Features ...................................... 12-13

Assembly .................................... 13-14

Operation .................................... 14-23

Maintenance ............................... 24-30

Bar and Chain Combinations ............ 31

Troubleshooting ................................31

Parts Ordering/Service ........ Back Page
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE DES MATIÈRES
 Avertissements règles de sécurité
relatives aux outils électriques
........ 2-4

Avertissements de sécurité
relatifs au scie à chaîne
................... 4-8

Symboles ...................................... 9-10

Glossaire ...........................................11

Caractéristiques .......................... 12-13

Assemblage ................................ 13-14

Utilisation .................................... 14-23

Entretien ...................................... 24-30

Combinaisons de guide et chaîne ....31

Dépannage ........................................ 31

Commande de pièces/
réparation
.......................... Páge arrière
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
ÍNDICE DE CONTENIDO
 Advertencias de seguridad
para herramientas eléctricas
........... 2-4
 Advertencias de seguridad
de la motosierra
.............................. 4-8
 Símbolos ....................................... 9-10
 Glosario de términos ......................... 11
 Características ............................ 12-13
 Armado ....................................... 13-14
 Funcionamiento .......................... 14-23
 Mantenimiento ............................ 24-30
 Combinaciones de barra y cadena ...31
 Correción de problemas ...................31
 Pedidos de piezas/
servicio
........................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Ryobi RY40507 Specifications

General

Brand	Ryobi
Model	RY40507
Category	Chainsaw
Language	English

Summary

General Power Tool Safety Rules

Work Area, Electrical, and Personal Safety

Guidelines for safe work areas, electrical precautions, and personal protective measures.

Tool Use, Care, and Battery Safety

Proper usage, maintenance, battery handling, and care instructions for power tools.

Service and General Warnings

Information on servicing tools and general warnings applicable to power tool operation.

Chain Saw Safety Warnings

Kickback Prevention and Causes

Explains kickback causes and operator prevention methods for chain saws.

Safety Features and Handling

Information on low kickback chains, guide bars, and proper handling for safety.

Symbols and Glossary

Signal Word and Product Symbols

Defines risk signal words and explains product-specific symbols for safe operation.

Glossary of Terms

Provides definitions for technical terms related to chain saw operation and parts.

Features

Product Specifications

Lists the technical specifications of the 40 Volt brushless chain saw.

Key Component Identification

Identifies and explains important features like the lock-out button, switch trigger, and oil indicator.

Assembly

Unpacking and Inspection

Instructions for carefully unpacking and inspecting the product for damage or missing parts.

Operation

Product Applications and Safety

Outlines the intended uses of the chain saw and general operational safety precautions.

Battery Pack and Lubrication

Instructions for handling battery packs and adding bar/chain lubricant.

Starting, Stopping, and Grip

Steps for starting/stopping, and proper grip techniques for safe operation.

Cutting Techniques and Tree Work

Covers cutting stances, procedures, felling, bucking, limbing, and pruning.

Maintenance

General Maintenance and Safety

Basic cleaning, safety precautions, and part replacement guidelines for the chain saw.

Bar, Chain, and Tension Adjustment

Procedures for replacing bar/chain, and adjusting chain tension for optimal performance.

Chain Sharpening and Guide Bar Care

Instructions for sharpening chain cutters, adjusting depth gauge, and maintaining guide bars.

Troubleshooting and Parts

Troubleshooting Common Issues

Addresses common problems like overheating, smoking, and non-rotating chains with solutions.

Parts and Service Information

Details on obtaining replacement parts, locating service centers, and contacting support.