Ryobi RY40509 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
12 in. 40 VOLT BRUSHLESS CHAINSAW
SCIE À CHAÎNE SANS BALAI
DE 40 V DE 30,5 cm (12 po)
MOTOSIERRA SIN ESCOBILLAS
DE 30,5 cm (12 pulg.), 40 V
RY40509
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
TABLE OF CONTENTS
 General Power Tool Safety Rules .... 2-4
 Chainsaw Safety Warnings ............. 4-8
 Symbols ........................................ 9-10
 Glossary of Terms .............................11
 Features ...................................... 12-13
 Assembly .................................... 13-14
 Operation .................................... 14-21
 Maintenance ............................... 22-29
 Bar and Chain Combinations ............ 30
 Troubleshooting ................................30
 Parts Ordering/Service ........ Back Page
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE DES MATIÈRES
 Avertissements règles de sécurité
relatives aux outils électriques ........ 2-4
 Avertissements de sécurité
relatifs au scie à chaîne ................... 4-8
 Symboles ...................................... 9-10
 Glossaire ...........................................11
 Caractéristiques .......................... 12-13
 Assemblage ................................ 13-14
 Utilisation .................................... 14-23
 Entretien ...................................... 24-31
 Combinaisons de guide et chaîne ....32
 Dépannage ........................................ 32
 Commande de pièces/
réparation .......................... Páge arrière
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
ÍNDICE DE CONTENIDO
 Advertencias de seguridad
para herramientas eléctricas ........... 2-4
 Advertencias de seguridad
de la motosierra .............................. 4-9
 Símbolos ..................................... 10-11
 Glosario de términos ......................... 12
 Características ............................ 13-14
 Armado ....................................... 14-15
 Funcionamiento .......................... 15-23
 Mantenimiento ............................ 24-32
 Combinaciones de barra y cadena ...32
 Correción de problemas ...................32
 Pedidos de piezas/
servicio ........................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Ryobi RY40509 Specifications

General

Motor	Brushless
Battery Voltage	40V
Power Source	Battery
Type	Chainsaw
Bar Length	16 inches
Chain Type	Oregon
Chain Pitch	3/8 inch
Chain Gauge	0.050 inch

Summary

General Power Tool Safety Rules

Work Area and Electrical Safety

Safety rules for the work environment and electrical precautions.

Personal Safety and Operation

Operator alertness, PPE, and safe handling practices.

Tool Use, Care, and Battery Safety

Proper usage, maintenance, and battery handling for power tools.

Chainsaw Safety Warnings

General Chainsaw Operation Safety

Fundamental safety rules for operating the chainsaw, including body positioning and handling.

Kickback Hazards and Prevention

Explains kickback causes and methods to avoid it, emphasizing grip and technique.

Operator Protection and Safe Practices

Guidance on protective gear, stance, and safe cutting procedures.

Symbols and Glossary

Safety and Operational Symbols

Explanation of signal words and symbols related to product safety and operation.

Glossary of Terms

Definitions of chainsaw components, operations, and safety features.

Features and Assembly

Product Features and Specifications

Overview of the chainsaw's key features, components, and technical specifications.

Unpacking and Assembly

Instructions for unpacking, inspecting, and checking the chainsaw package contents.

Operation Guide

Pre-Operation Checks and Setup

Critical warnings, applications, battery installation, and lubrication.

Starting, Stopping, and Handling

Procedures for safe starting, stopping, grip, and stance during operation.

Cutting Techniques and Work Area Safety

Guidance on cutting methods, bucking, limbing, pruning, and work area safety.

Maintenance Procedures

General Maintenance and Safety

Basic cleaning, precautions, and safety during maintenance tasks.

Bar and Chain Service

Replacing the bar and chain, and adjusting chain tension.

Chain Sharpening and Guide Bar Care

How to sharpen cutters, adjust depth gauges, and maintain the guide bar.

Transporting and Storage

Guidelines for safely transporting and storing the chainsaw.

Troubleshooting and Specifications

Bar and Chain Specifications

Details on chain pitch, gauge, and drive links for the saw.

Problem Solving

Common issues and their solutions for chainsaw operation.