GB GB
93
92
Note：
1) During the setting, Hour/ Minute icon will flash, alarm clock
icon “ ” will always bright.
2) During the setting, long press switch knob or touch “ ” key
will cancel the current reminder time setting and return to system
time
3) If a reminder feature has been set, then the reminder icon “ ”
should always be displayed when the menu is working, and the
reminder time can be queried.
9. Start/pause/cancel function
• After setting the cooking functionand cooking time,press the
switch knob key to start work; press the switch knob key again to
suspend the oven and cooking temperature flashing, the cooking
temperature can be adjusted again by rotating switch knob key
(note: the functional setting is not available), and press the
switch knob again to start work.
• In the process of oven work, the oven can long press the switch
knob ortouch “ ” key to directly stop working, and return to the
standby state. At this time, the set cooking time and reservation
time are also canceled.
10. Protection function
10.1 Display will show E-1 iftemperature sensor is short circuit or
open circuit under cooking mode, buzzer will continuouslysounds
for 10 times (1s/time), refer to display effect 12. Oven will be
locked at this time,at this time long press switch knob or K2 “ ”
key can return to standby mode.(Cooling fan will keep working)
self-cleaning process, oven door will be unlocked only after power
on again. (Note: Even if power on again, oven door will be
automatically unlocked only when cavity temperature is below
280C.)
During other function mode working, if oven temperature is
abnormal, the oven door will be relieved only when cavity
temperature is below 280C.
After the oven reservation function is completed or the
reservation function is canceled, the door lock can be
automatically unlocked.
8. Reminder function
This appliance have clock reminder function. Touch the “ ” key
to enter the clock reminder function setting and the “ ” icon
will flash:
(1) Touch or long press the “+”“-” key to set the reminder time,
setting range is :00:00-23:59.
(2) After the reminder time setting is completed, touch the “ ”
key or wait for 10 seconds, the display board displays the system
time, “ ” sign always lights. Reminder time starts by the
second countdown. When the time countdown is zero, the buzzer
rings for 5 minutes (1s/time), and the reminder time icon “ ”
flashes for 5 minutes (1s/time), then stop flashing by press any
button.
This appliance have clock reminder function. Touch the
To Next Page
Loading...