MANUAL MACHINES 07 DISASSEMBLY
SAECO Page / 08
03
Loosen the screw as shown
Loosen the screws as shown
Loosen the screw as shown
Loosen the
screw of the
valve holder
Check the condition of the
shower, valve holder screw,
channels (holes not blocked)
and verify there is no limescale
on any of the parts
Shower
Loosen the screws as shown
Check the internal condition of the boiler
(limescale, any breakages, condition of the
O-ring seal, etc.)
When putting back the thermostats,
always apply conductive paste for the
thermostat to adhere perfectly to the
boiler
7.1.8 Steam pipe
7.1.5 Boiler thermostats
7.1.6 Boiler
7.1.7 Shower and valve