Saeco HD8763 - Inserting the Milk Carafe; Removing the Milk Carafe

28 ENGLISH
1
2
Inserting the Milk Carafe
1
If installed, remove the water dispensing spout as shown in the  gure:
- Press the two buttons on the side to unlock it and lift it slightly;
- Pull the water dispensing spout to remove it.
2
Slightly tilt the milk carafe. Insert it all the way into the guides of the
machine.
3
Push the carafe towards the bottom while rotating at the same time,
until it is locked at the drip tray.
Do not force the carafe while inserting it.
Removing the Milk Carafe
1
Rotate the carafe upwards until it releases from the insert in the drip
tray. Then remove it.