Saeco HD8763 - Replacing the INTENZA+ Water Filter

20 ENGLISH
Yellow
Replacing the “INTENZA+” Water Filter
When the “INTENZA+” water  lter needs to be replaced with a new one, the
following icon is displayed.
1
Replace the “INTENZA+” water  lter as described in the previous chap-
ter.
2
Press the “ ” button and scroll through the options by pressing the “
” button until the following icon is displayed.
YellowYellowGreen
3
Select the “RESET” option. Press the " " button to con rm.
4
To exit, press the “ ” button. The machine shows this display and is
ready to brew.
The machine is now programmed to manage a new “INTENZA+” water
 lter.
Note:
If the “INTENZA+” water  lter is already installed and you want to remove,
but not replace it, select the “OFF” option instead.
If there is no “INTENZA+” water  lter installed, insert the small white  lter
previously removed into the water tank.
Yellow