EasyManua.ls Logo

Saeco HD8763 - Adjusting the Cappuccino Length

Saeco HD8763
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
ENGLISH
10
Insert the milk carafe dispenser back by sliding it up to the icon.
Note:
After using the milk carafe, clean it as described in the "Cleaning and Main-
tenance" chapter.
You can prepare a cappuccino with pre-ground co ee.
Press the
button to select pre-ground co ee and pour pre-ground
co ee into the compartment.
Adjusting the Cappuccino Length
Each time the button is pressed, the machine brews a pre-set quantity
of cappuccino into the cup.
The machine allows you to adjust the amount of cappuccino brewed ac-
cording to your taste and the size of your cups.
1
Fill the carafe with milk and insert it into the machine.
2
Pull out the milk carafe dispenser to the right up to the icon. Place
a cup under the dispensing spout.
3
Press and hold the button until the “MEMO icon appears on the
display. Then release the button. The machine is now in programming
mode.

Table of Contents

Related product manuals