Saeco HD8763 - Accidental Interruption of the Descaling Cycle

68 ENGLISH
ACCIDENTAL INTERRUPTION OF THE DESCALING CYCLE
Once the descaling process has started, it must be completed; do not turn
o the machine mid-cycle.
If the descaling process is accidentally interrupted (power failure or ac-
cidental disconnection of the power cord), follow the steps below.
1
Check that the power button is set to "I".
2
Press the “ ” button to turn on the machine.
YellowYellow
3
If the cycle was interrupted during the descaling phase, it will be
resumed from point 11 of the "Descaling" chapter. Press the “
”
button to restart the cycle.
4
If the cycle was interrupted during the rinse phase, it will be resumed
from point 18 of the "Descaling" chapter.
Press the “
” button to restart the cycle.