60
ENGLISH
3
Put a “Co ee Oil Remover” tablet in the pre-ground co ee compart-
ment.
Green
4
Press the “ ” button to select the pre-ground co ee function without
adding any ground co ee to the compartment.
5
Press the “ ” button to start the co ee brewing cycle.
6
Wait until the machine has dispensed half a cup of water.
7
Switch the power button on the back of the machine to “0”.
10
Remove the drip tray and the co ee grounds drawer, empty them and
open the service door. Remove the brew group.
8
Let the solution take e ect for about 15 minutes. Make sure you dis-
card the dispensed water.
9
Switch the power button on the back of the machine, to “I”. To turn on
the machine, press the “
” button.
Wait until the end of the automatic rinse cycle.
To Next Page