Saeco MAGIC B2 - Warm-Up and Rinsing; Rinse;Self-Cleaning Cycle

English
51
9
9.2Warm-up and Rinsing
9
Uponstart-up,themachineactivatesthewarm-up
phase. Wait until it is completed.
99999
Thebarsadvanceand
showthatthemachineis
warming up the system.
99
Oncewarm-uphasbeencompleted,themachine
performs a rinse cycle of the internal circuits.
99999
Theprogressbarindicates
thatthemachineis
performingtherinsecycle
of the system.
99
Asmallamountofwaterisdispensed.Waituntilthe
cycle is completed.
9
Whentheproductselectionscreenappears,the
machine is ready to use.
9999
Ifthemachineisusedfor
thefirsttimeoraftera
longperiodofinactivity,
contacttheService
Provider to start it up.
999
9.3Rinse/Self-Cleaning Cycle
9
Thecyclepermitstheinternalcircuitstoberinsed
with fresh water. The cycle is carried out:
99
For the coffee circuit
9
•
When the machine is started;
9
•
DuringtheStand-bypreparationphaseifcoffeewas
dispensed when the power is turned on;
9
•
After waking up from stand-by;
99
For the milk circuit (*only versions M2 and M1).
9
•
Whenthemachineisstartedifmilkwasdispensed
when it was turned on previously;
9
•
Whenwakingupafterstand-byifatleastonemilk
product was dispensed before going into stand-by;
9
•
Afteraspecificperiodoftimefollowingthelastmilk
product;
99
A smallamountofwater willbedispensedto rinseand
heat all the machine parts.
99