Safety Vision SV-LED70WQ4 User Manual

SV-LED70WQ4 Owner’s Manual7” Digital TFT LCD All Round Vision Monitor
3
OPERATION
POWER
Press the [POWER] button to turn the monitor on or off.
MENU
Press the [MENU] button to access system menus and settings.
CAMERA SELECT
Press the [CA-SEL] button to cycle through camera display modes.
(CA1-CA2-CA3-CA4-SPLIT-PIP-TRIPLE-QUAD)
Press the [CA-SEL] button to select different options in system menus.
LEFT
Press the [<] button to adjust the monitor volume down.
Press the [<] button to change settings in system menus.
RIGHT
Press the [>] button to adjust the monitor volume up.
Use [>] button to change settings in system menus.
DIMMER
Automatic brightness control sensor.
A
B
C
D
E
F
A
E
F
D
C
B
PASSWORD
The system menus are locked to prevent unauthorized access. To
unlock the menus:
1. Press and hold the [MENU] button for 5 seconds.
『
PASSWORD
』
appears on the screen.
2. Quickly press [CA-SEL], then [>], then [<].
The system menus appear. The menus become locked again
when the unit is powered OFF/ON.

Safety Vision SV-LED70WQ4 Specifications

General

Brand	Safety Vision
Model	SV-LED70WQ4
Category	Monitor
Language	English