Need help?Do you have a question about the Safety Vision SV-LCD70A and is the answer not in the manual?
General| Screen Size | 7 inches |
|---|---|
| Resolution | 800 x 480 |
| Input Voltage | 12V DC |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 500:1 |
| Video System | NTSC/PAL |
| Power Supply | 12V DC |
| Video Input | 2x Composite |
| Viewing Angle | 140° H / 120° V |
Safety precautions against electric shock; refer servicing to qualified personnel.
Use DC 10V-32V; turn off power if liquid/dust leaks and consult technician.
Avoid hot, humid, direct sunlight, dust, vibration, or shock for installation.
Clean with a slightly damp soft cloth and mild detergent; avoid strong solvents.
How to turn the monitor on, off, and use stand-by mode via the power button.
Use the -/+ buttons to decrease or increase speaker volume.
Adjust camera tilt angle upward or downward using the UP/DOWN buttons.
Select the display image from camera inputs (CAM1-4) and split modes.
Enter display or main menu by pressing the MENU button.
Automatically adjusts image brightness based on ambient lighting conditions.
Adjust Brightness, Contrast, Color, and Tint settings for display modes.
Access main menu for Camera, Trigger, Split, and other settings.
Configure camera view (Normal/Mirror), name, sort order, and tilt functions.
Configure trigger sources, delay times, and distance marker display.
Set up various display modes like Dual, Triple, and Quad screen views.
Adjust sensor sensitivity and night brightness for automatic mode activation.
Enable auto scan function and adjust the scanning time between cameras.
Configure image orientation, video format, auto power, and factory reset.
Instructions for securely mounting the monitor stand bracket to the dashboard.
Steps to install the sun visor accessory to the monitor.
Details on wire colors and their specific functions for power and trigger signals.
To Next Page
