Safety Vision SV-LCD70A User Manual

7
OPERATIONS
r
1. DISPLAY MENU
2. MAIN MENU
Shifting Option settingLong Key
(more than 2 sec)
Short Key
(more than 0.5 sec)
MENU
MENU
Selecting
SOURCE
SOURCE
SOURCE
SOURCE
Option setting Exit
MENU
Shifting
UP / DN
UP / DN
30
30
30
30
BRIGHT
CONTRAST
COLOR
TINT
DISPLAY MENU
30
30
30
30
BRIGHT
CONTRAST
COLOR
TINT
* menu is displayed in NTSC only.
TINT
(0~60)
(0~60)
(0~60)
(0~60)
NTSC MODE
PAL MODE
Press and hold (over 2 seconds) to enter the MAIN MENU.
Selectable OSD MENU disappears within 7sec if there is no new button
pressed.
A
=
MENU
MENU
MENU UP
DN
UP
DN
SOURCE
SOURCE
- / +
+
*User can set up an individual display mode for CAM channel and
AUX channel using "DISPLAY MENU".
a. CAM Display setting:
Activate "DISPLAY MENU" on CAM Channel by pressing
and set up Display menu.
*If you set up the display mode of CAM Channel, CAM1~CAM4 will
be displayed as same display mode.
b. AUX Display setting:
Activate " DISPLAY MENU" by pressing on AUX Channel
and set up Display menu.
2
NOTE
MENU
MENU
MENU

Safety Vision SV-LCD70A Specifications

General

Brand	Safety Vision
Model	SV-LCD70A
Category	Monitor
Language	English