10
Install Forward Facing - Group 1 (9 to 18kg) - ISOFIX & Top Tether Install
The child seat has 3 adjustable forward facing levels, position 1,2 & 3.
1 - Adjust the recline position by pulling the red handle at the front of the seat
and adjust the seat to one of the forward facing positions (Fig.1).
2 - Press the ISOFIX Release Button then slide the ISOFIX Connectors
outwards. Do this for both sides (Fig.2).
3 - Place the child seat in a forward facing position on the rear seat of your
vehicle and guide the ISOFIX Connectors into the vehicle’s ISOFIX brackets.
Ensure that the ISOFIX Indicator turns GREEN.(Fig.3).
4 - Move the seat from side to side to ensure that it is connected properly
(Fig.4).
5 - Guide the Top Tether Belt over the back of the vehicle seat and lock the
Snap Hook into the anchorage point of the vehicle (Fig.5).
6 - Tension the strap of the Top Tether until the indicator turns green and the Top
Tether is properly tensioned (Fig.6).
Fig.1
Fig.2 Fig.3
Fig.4
Fig.5
Fig.6
To Next Page
Loading...
