8
Using the buckle
1 - Fasten the buckle by joining the two tongues together.
2 - Insert them into the buckle.
3 - Ensure that a “CLICK” is heard.
4 - Check if the buckle is properly locked by pulling the shoulder straps upwards
Loosening the harness
Securing your child in the seat
1 - Loosen the harness by pressing the adjuster buckle located an the front of
the seat, then pull the harness straps forward. Do not pull the belt pads.
2 - Unfasten the harness buckle by pressing the red button and remove the
tongues. Move the harness straps to the side of the child seat.
1 - First adjust the height of the shoulder
belts (Page 7).
2 - Loosen the harness.
2 - Unfasten the harness buckle.
3 - Place your child in the child seat.
4 - Position the harness straps around
your child and fasten the buckle.
5 - Pull the front adjuster belt until the
harness fits snugly around your child.
3
To Next Page
Loading...
