MF 5401
- 10 -
2 - Installation
Packaging contents
The packaging contains the items listed below:
Multifunction device
Control panel
1 toner cartridge
1 installation guide and 1 PC installation CD ROM
1 power cord
1 initialisation card
Device installation
1 Unpack the device.
2 Install the device respecting the security notices
stated at the beginning of this booklet.
3 Remove all stickers from the machine.
4 Remove the plastic protection film from the screen.
5 Place the control panel in front of the machine,
insert the control panel in its back slots (A).
6 Push the front side of the control panel (B) to clip it.
Feed cassette paper insertion
Your device accepts a number of formats and types of
papers (refer to the paragraph Consumable
specifications, page 38).
1 Remove the paper feed cassette completely.
Before inserting paper, refer to the
paragraph Paper recommendations,
page 7.
You can use paper weighing between
60 and 105 g/m2.
A
B
B
To Next Page
