4• Connecting your BOX to the landline
Connect one end of the RJ11 cable (telephone cable) to the landline port at the back
of LaBOX and the other end to your home phone.
5• Connecting your BOX to a power supply
Connect your BOX to a power supply outlet using the AC adaptor provided with your Box.
Press the ON button at the back of LaBOX to turn it on.
The installation is now complete.
If this is the rst installation of LaBOX, please follow the
instructions that appear on your television screen.
AUDIO
OPTICAL R
LCOAXIAL
CABLE
RESET
USB 1
USB 3 USB 2
WAN Ethernet
TEL
12V 5A
LAN 4LAN 3LAN 2LAN 1
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
AUDIO
OPTICAL R
LCOAXIAL
CABLE
RESET
USB 1
USB 3 USB 2
WAN Ethernet
TEL
12V 5A
LAN 4LAN 3LAN 2LAN 1
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Landline cable Home phone
AC
adaptor
On/O
button
Power supply
outlet
L
M
N
LaBOX Installation
1• Hard drive installation
Insert your hard drive into the slot on the left
side of LaBOX.
Warning: please switch o your BOX before
inserting the hard drive.
2• Connecting your BOX to the wall outlet
Plug the antenna cable into the cable entry at the back of LaBOX and into the wall TV outlet.
Warning: Your TV outlet may look dierent from the one below.
3• Connecting your BOX to the television
Connect one end of the HDMI
®
cable to the HDMI TV/OUT port located on the BOX and the other
end to one of the HDMI
®
ports on your TV.
AUDIO
OPTICAL R
LCOAXIAL
CABLE
RESET
USB 1
USB 3 USB 2
WAN Ethernet
TEL
12V 5A
LAN 4LAN 3LAN 2LAN 1
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
AUDIO
OPTICAL R
LCOAXIAL
CABLE
RESET
USB 1
USB 3 USB 2
WAN Ethernet
TEL
12V 5A
LAN 4LAN 3LAN 2LAN 1
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.