To Next PageTo Next Page
Need help?Do you have a question about the SAGEMCOM TalkTalk FAST 5364 and is the answer not in the manual?
General| Brand | SAGEMCOM |
|---|---|
| Model | TalkTalk FAST 5364 |
| Type | Wireless Router |
| Ethernet Ports | 4 |
| WAN Port | 1 |
| USB Ports | 1 |
| Power Supply | 12V DC |
| Wireless Standards | 802.11a/b/g/n/ac |
| Ethernet Ports Speed | Gigabit |
| DSL Port | Yes |
| Wireless Standard | 802.11n |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Security | WPA2 |
Details on antenna configuration and Wi-Fi class.
Supported Wi-Fi modes and 802.11ac features like MU-MIMO.
Information on network types, security protocols, and connection ports.
Explains the different states of the router's single status light.
Guide to finding credentials and changing the admin password.
Introduction to the main dashboard sections: Internet, Wi-Fi, and Devices.
Visual guide on how to navigate from the dashboard to the Wi-Fi Hub.
Configuration of DNS servers for Fibre IPv4 connections.
Configuration for ADSL connection type, VCI/VPI, and DNS settings.
Setting device names, icons, and viewing properties.
Notes on missing icons for device management in the firmware.
Basic settings for 2.4 GHz and 5 GHz Wi-Fi bands, including SSID and password.
Customizing 2.4GHz wireless mode, bandwidth, security, and WPS.
Configuring MAC filtering rules for the 2.4GHz Wi-Fi band.
Customizing 5GHz wireless mode, bandwidth, security, and WPS.
Configuring MAC filtering rules for the 5GHz Wi-Fi band.
Detailed statistics for each of the router's Ethernet ports.
Explanation that Guard Interval is automatically negotiated by the router.
How the router automatically moves 5GHz devices to the 5GHz band.
Configuration of router IP address, subnet mask, and DHCP IP address pool.
Setting DNS servers handed out by DHCP for local clients.
Configuration of firewall levels and response to pings.
Enabling DMZ to make a device reachable from the internet.
Configuring Dynamic DNS providers like DynDNS and DuckDNS.
Setting up port forwarding rules for specific devices or services.
Displays hardware version, software version, GUI version, and uptime.
Shows IP addresses, MAC addresses, and Wi-Fi band statistics.
Displays connection status, rate, noise margin, and attenuation for DSL.
Access to resets, backup/restore, software updates, and logs.
Setting the gateway time using NTP servers.
Viewing operator logs for system events and debugging.
