TalkTalk Wi-Fi Hub (Sagemcom FAST 5364)
Irrespective of the method used to arrive at the Add Rule Manually screen, the following fields need
to be completed:-
Parameter Notes
Custom service name A unique name of your choice used to identify this port forwarding rule
Service Set to any of the predefined port forwarding scenarios where specified
ports are already set for the user.
To forward a non standard port select Other as the service & complete the
port ranges & protocol as required.
Port ranges enter the first and last port in range separate with a dash (-),
example port 5001 to 5100 enter 5001-5100
External host Leave blank unless it is required to restrict access from just one IP address
or domain.
Internal & External
ports
To include a range of contiguous ports use the hyphen character, e.g.
33045-33048
Internal Host The IP address of the device that ports are to be forwarded to.
Note 1: this router unlike the HG633 does not require port translation when forwarding TCP port
80.
Note 2: to overcome the problem of public (WAN) IP address changes, you should also use a
DDNS provider that is supported by the router. See this section on DDNS.
Page 30 of 38 Date: 25/06/2018
To Next Page
Loading...
Need help?
General
