SAILFISH 276 DC | FRESHWATER WASHDOWN & SHOWER SYSTEM
The freshwater washdown and shower system
on your Sailfish Boat is powered by a Shur-flo Pro
Blaster Pump which creates a pressurized system,
once the pump is turned on and pressure is created
throughout the freshwater hoses; once they are
all pressurized the pump will shut down until more
pressure is needed.
All of the freshwater systems on the boat will
operate on this system once the freshwater switch is
engaged.
You should allow a few seconds for the system
to prime and pressurize before attempting to
use any of the showers/sinks ect.
The freshwater holding tank is located behind the
fuel tank in the bilge area.
The fill for this tank is located under the boarding
ladder on the port side of the vessel. The freshwater
pump can be accessed through the bilge access
door in the aft of the vessel.
37
To Next Page
Loading...
