SAILFISH 276 DC | RAW WATER WASHDOWN SYSTEM
The raw water wash down on your Sailfish Boat is
powered by a Shur-flo Pro Blaster Pump which
creates a pressurized system, once the pump is
turned on and pressure is created the pump will shut
down until more pressure is needed. The raw water
wash down pump can be accessed through the bilge
access door in the aft of the boat.
To operate make sure the seacock is in the open
position. The hose fitting for the wash down is
located in the transom splash well, to use simply
attach a hose with a nozzle and turn the switch on.
Pressure will build up in the hose and the nozzle and
as you spray the pump will continue to engage as
needed.
36
To Next Page
Loading...
