Sailfish 320 CC - Livewell Operation Instructions

01/20/2015 Sailsh320CCOwner’sManual|sailshboats.com 20
Livewell Operation
Instructions
• Make sure the seacock below the baitwell pump is
in the open position (seacock is accessed through
the hatch under the transom walk thru door).
• Turn on the livewell switch.
• Adjust the black aerator in the livewell to the desired
ow (if your model has a livewell in the leaning post
you can adjust the aerator to pump water into the
transom livewell or the leaning post livewell or both)
• In order to ll the livewell, reach in the access hatch
below the livewell and close the red handle ball
valve.
• The livewell will ll up until it reaches the Overow
built into the side of the livewell. This allows the
water to continually pump in and drain out while
maintaining the water level.
• To drain the livewell open the red handle ball valve.
CLOSED