1 GENERAL INFORMATION RT2047 DSC - PART II
PAGE 1-4
SHIFT FUNCTIONS
Press
SCAN
Selects scanning programmes.
Press
ADD
SCAN
Adds a channel to the scanning table.
Press
DELETE
SCAN
Deletes a channel from the scanning table.
Press
PROG
SCAN
Stores the current scanning programme in the memory.
Press
TIME
SCAN
Selects the scan time from 1 to 99 seconds. The time chosen will be used to listen
on one of the secondary channels receiving a signal.
Press
D.W.
Selects the dual watch facility.
Press
SELCALL
RESET
Resets the selcall decoder after a call.
Press
SELCALL
TEST
Tests the selcall decoder.
Press
1W
Selects 1 W reduced power output.
Press
USA
Selects the VHF channels used in USA.
Press
DIM
Switches the panel illumination on or off.
Note: See the VHF RT2047 Operating Manual for functional description.
9543
To Next Page
Loading...
