SAJ H2-10K-T2 - Page 11

Hybrid Solar Inverter User Manual
15
16
2. Install the mounting bracket to the wall.
① Drill four holes in the mark positions on the wall.
② Align the holes in the mounting bracket to the drilled holes in the wall.
③ Use a rubber mallet to insert the plastic expansion bolts into the holes.
④ Install the screws.
3. Carefully mount the inverter into the mounting bracket. Tighten the screws to secure the inverter.
1
2
3
4
M6*50
1.2-1.5 N·m
M5*12
1.0-1.2 N·m