3. If you do not have an account, register first.
a. Click Register. Choose whether you are an owner or an installer or distributor.
b. Follow the instructions on the screen to complete the registration.
4. Use the account and password to log in to the App.
5. Go to the Tool interface and select Remote Configuration. Click on Bluetooth and enable the Bluetooth
function on your mobile phone. Then, click on Next.
6. Choose your inverter according to your inverter SN. Click on the inverter to enter inverter settings.
7. Complete the inverter settings by following the instructions on the screen.
Example:
To Next Page
Loading...
