salling 80000321 - BEFORE FIRST USE

13
A. Sous vide oven Base: The sous vide base has a stainless steel exterior with easy lift
handles and houses the heating unit and temperature probe. The base holds the sous vide
oven water tank with transparent lid. The simple set control panel is housed on the front side
panel of the base.
B. Transparent lid: an important feature of the sous vide oven is the transparent lid. Designed
with a full viewing window, the lid allows observation of the cooking process without opening
the lid. Opening the lid while cooking is not recommended, as it reduced the oven temperature
and causes a subsequent increase in cooking times.
To open the lid after cooking, use the handle to lift up and away from your face. Care should be
taken when opening the lid, as the collected steam may be hot. Use pot holders, if needed, to
open the lid and stand well away from any escaping steam. Place the lid on a heat-resistant
surface. Remove the hot food bags with tongs.
C. EasyLift handle: the engineered easy lift handles on the sous vide oven base allow for the
safe movement of the base, particularly when removing the water after usage. The sous vide
oven base should only be moved while it is unplugged and cooled down. The easylift handles
allow the user to safely grasp both handles and pour the water into a sink.
D. Sous vide oven water tank: D.The sous vide oven water tank is non-removable. Food
should not be placed in the water tank without a prepared bag for cooking.
The temperature probe is the small pin in the bottom of the water tank that monitors the oven
temperature and maintains it. Do not block access to the probe with lled food bags.
E. Sous vide oven water fill levels: note that water tank wall indicates a minimum ll line
and the maximum ll line. While cooking, the water level must always remain between the
two lines.
BEFORE FIRST USE：
1.Remove all packaging and discard plastic bags.
2.Wipe the stainless steel sous vide oven base with stainless steel cleaner.
3.Using a warm, damp cloth, thoroughly wipe the interior of the water tank. Dry well.
4.Using a warm, damp cloth, wipe the Lid. Dry well.
5.Follow the step-by-step instructions and enjoy!