5. Press the PROG Button twice to set the time for the Delayed Brew
Cycle. (NOTE: The word TIMER will appear in the top left of the
display)
6. Select your desired brew start time by following the steps in the
How to Set the Clock section and press the PROG Button. The blue
Delayed Brew Indicator Light will illuminate. NOTE: The delayed
brew function can be cancelled at any time by pressing the PROG
Button once.
7. Once the clock reaches the preset time to start the Brew Cycle,
the blue Delayed Brew Indicator Light will go out and the red ON
Indicator Light will illuminate and the brew cycle will start.
8. After the brew cycle is nished, the Coee Maker will automatically
switch over to ‘Keep Warm’ mode for the next two hours. The
‘Keep Warm Cycle’ will shut o automatically and the On Indicator
Light will go out at the end of the 2 hours. NOTE: The keep warm
time will be shown on the display as soon as the brewing cycle has
ended. The clock will not appear during this time. If you wish to turn
o the Coee Maker before 2 hours has elapsed, press the ON/OFF
Button once and unplug the coee maker from the wall outlet.
‘PAUSE & SERVE’ FEATURE
The ‘Pause & Serve’ feature allows you to pour a cup of coee before
the brew cycle has nished. Remove the Carafe slowly to temporarily
stop the ow of coee. Quickly pour a cup of coee and reposition the
Carafe securely on the Keep Warm Plate. NOTE: Do not remove the
Carafe for longer than 30 seconds.
CARE AND CLEANING
1. Unplug the Coee Maker and allow it cool before cleaning.
2. Remove the Reusable Filter and the Filter Holder from the Coee
Maker.
3. The Filter Holder, Permanent Filter and Carafe can be washed in
warm soapy water. NEVER use abrasive cleansers on any part of the
Coee Maker.
4. Wipe the Main Housing and Warming Plate with a soft damp cloth.
NEVER IMMERSE THE MAIN HOUSING IN WATER OR ANY OTHER
LIQUID.
5. All servicing, other than cleaning, should be performed by an
authorized service representative. See Warranty section.
6
To Next Page
Loading...
