Salus Quantum SQ610 - Installation in OFFLINE Mode; Pairing with Wiring Centre;Control Box

10
Installation in OFFLINE mode
1
2
3
Open the ZigBee network
4
5
6
Select system type: UNDERFLOOR,
press button to conrm
Using and buttons select the Control
Box number (press PAIR button on the Control
Box to see its address number). Press button
to conrm
Use or buttons to select
the zone number and press
button to conrm.
8
7
Now you can pair your thermostat
with additional zones. Select one
more zone or nish the pairing
process by button.
OR
5 sec
5 sec
9
Close the ZigBee network
OR
5 sec.
5 sec
Pairing with Wiring Centre / Control Box (Install the Wiring Centre / Control Box according to the
instructions included with product)
3
3