Need help?Do you have a question about the Salus iT500 and is the answer not in the manual?
General| Frequency | 868 MHz |
|---|---|
| Interface | Z-Wave |
| Control type | Touch |
| Product color | Black, Silver |
| Smart thermostat | Yes |
| Units of measurement | °C |
| Maximum outdoor range | 30 m |
| Temperature range (T-T) | 5 - 35 °C |
| Battery type | AA |
| Operating voltage | 2 V |
| Number of batteries supported | 2 |
| Handheld remote control | No |
Weight and Dimensions| Depth | 30 mm |
|---|---|
| Width | 128 mm |
| Height | 95 mm |
Lists the EC Directives the product complies with, including EMC and Low Voltage directives.
Provides essential safety warnings and installation precautions for the thermostat unit.
Highlights key features like internet control, programmability, security, and energy efficiency.
Lists the items included with the iT500 Thermostat, Receiver, and Gateway.
Describes optional accessories like the iT300 Temperature Sensor Transmitter.
Explains the iT500's role in replacing existing controls and its configurable arrangements.
Illustrates a system with two heating zones controlled by the iT500.
Diagrams a system controlling both heating and hot water.
Shows how to connect the iT500 system to the internet via the iTG500 Gateway.
Step-by-step guide to replacing an old controller with the iT500RX Receiver.
Wiring diagram for a Volt Free Combination Boiler installation.
Wiring diagram for a 230V Switching Combination Boiler installation.
Wiring diagram for a 2-zone Volt Free Combination Boiler.
Wiring diagram for a 230V Switching S Plan system.
Wiring diagram for a 2-zone 230V Switching Combination Boiler.
Wiring diagram for a 230V Switching Y Plan system.
Instructions for fitting the wall mounting bracket and attaching the thermostat.
Guide on positioning the thermostat on a flat surface using the provided stand.
Explains the process of pairing the iT500 Thermostat and iT500RX Receiver wirelessly.
Steps for connecting the iTG500 Gateway to your broadband router for internet access.
Instructions for installing the optional iT300TX sensor for two-zone heating systems.
Explains the virtual keys and their operations on the thermostat keypad.
Details the meaning of various icons and symbols shown on the thermostat display.
Describes the manual control options available on the iT500RX receiver unit.
Lists the configurable options during the initial installation setup.
Guide on how to access the thermostat's installation setup menu.
Steps to select between single/dual heating zones or heating plus hot water.
Allows selection of either heating or cooling mode for the configured system.
User selects units for temperature display (°C or °F).
User configures the correct time zone for the thermostat's location.
Procedure to enable or disable Daylight Saving Time (DST) settings.
Detailed steps for wirelessly pairing the iT500 Thermostat with the iT500RX Receiver.
Guide for pairing the optional iT300 Temperature Sensor Transmitter with the receiver.
Steps to select the user's country on the SALUS website for registration.
Instructions on how to download the iT500 app from app stores.
Guide to adding and renaming devices within the smartphone application.
Explains how to determine the system configuration before programming.
Details how to set program start times and desired temperatures for heating.
Presents the pre-set schedules for central heating and hot water.
Describes common settings and indicators used in the PC and smartphone app interfaces.
Shows the interface for managing a single central heating zone.
Illustrates the interface for managing two central heating zones.
Displays the interface for systems with heating and hot water control.
Instructions on how to enter the thermostat's settings mode for local programming.
Guide to selecting the preferred 12-hour or 24-hour clock format.
Procedure for manually setting the current date on the thermostat.
Detailed steps for programming time periods and temperatures for central heating zones.
Guide for programming the ON/OFF times for the hot water system.
How to temporarily change the heating setpoint temperature.
Procedure to manually turn off central heating for a specific zone.
Options for overriding hot water programming, including duration and permanent settings.
Methods to set hot water to always on, on for a period, or off.
Details on Energy Save and Holiday overrides, configurable via app/PC.
Explains the frost protection function and how it activates heating.
Instructions on how to lock and unlock the thermostat's keypad.
Description of the two-stage low battery warning indicators.
Steps for installing or replacing batteries in the iT500 Thermostat.
Procedure for returning the thermostat to its factory default settings.
Instructions on how to update the thermostat's firmware via OTA technology.
Environmental operating conditions for the thermostat.
Detailed technical specifications for the iT500 central thermostat unit.
Detailed technical specifications for the iT500RX thermostat receiver.
Detailed technical specifications for the iTG500 gateway device.
Detailed technical specifications for the iT300 temperature sensor transmitter.
Guidance on the proper disposal of electrical and electronic equipment.
Indicates the product meets CE marking requirements.
Outlines the two-year warranty terms and conditions for the product.
To Next Page
